TEMP

Parker Balston 75-83-220-M312

SKU: 7041
Op voorraad

Selecteer Conditie

Conditie
Prijs
Aantal
Actie
Gebruikt
Excl. BTW: โ‚ฌ700,00 (1 beschikbaar)
Incl. BTW: โ‚ฌ847,00
1
Prijzen zijn exclusief BTW. Neem contact met ons op voor groothandel prijzen of aangepaste configuraties.

Warranty Information

Belangrijk: Alle garanties zijn onze eigen garanties en dekken geen fabrieks- of fabrikantgaranties.
Garantieperiodes per Conditie
Nieuw 12 maanden
Gereviseerd 6 maanden
Gebruikt 3 maanden
Wij zijn geen geautoriseerde distributeur, vertegenwoordiger of partner van enig fabrikant of merk dat op deze website wordt vermeld

 

Parker Balston Analytical Gas System - Zero Air Generator
Model 75-83-220-M312 

The Parker Balston 75-83 Zero Air Generator is an engineered system which will replace inconvenient high pressure gas cylinders as a source of hydrocarbon-free air. The 75-83 will purify on-site compressed air to a total hydrocarbon concentration of less than 0.1 ppm (measured as methane). The Zero Air Generator may be used to generate fuel air for Flame Ionization Detectors (FID’s) or for a zero reference for any instruments which measure hydrocarbon concentration. The 75-83 is capable of producing up to 1000 cc/min of zero grade air and will serve up to three FID's.

Specifications:

Category Specification
Model Range 75–83
CSA Certification Standard CAN/CSA C22.2 No. 61010-1-12
IEC Certification Standard IEC 61010-1 / EN61010-1
IEC 61010 Installation Category Category II
IEC 61010 Pollution Degree Degree 2
UL Certification Standard UL 61010-1 (3rd Edition)
EMC Standards CISPR 11 / EN 55011 / EN 50082-1
Maximum Flow Rate 1000 cc/min
Total Hydrocarbon Concentration < 0.1 ppm
Total Carbon Monoxide (CO) Concentration < 1.0 ppm
Outlet Air Temperature Ambient +20°F (+11°C)
Min / Max Ambient Temperature 16°C – 38°C
Minimum / Maximum Inlet Pressure 40 – 125 psig (2.7 – 8.5 barg)
Maximum Relative Humidity 80% up to 31°C; 50% at 40°C
Maximum Altitude 2000 m
Maximum Inlet Hydrocarbon Content 100 ppm
Pressure Drop at Max Flow Rate < 5 psid (0.3 bar)
Startup Time 45 minutes
Electrical Requirements 100 VAC / 120 VAC / 230 VAC, 50–60 Hz, 0.5 A / 0.2 A
Physical Dimensions 12 in (W) × 10 in (H) × 3 in (D) 30 cm × 25 cm × 8 cm
Shipping Weight 7 lb (3 kg)
Fuses (100 V / 120 V Models) 5 × 22 mm, Type T, 250 V, 0.5 A
Fuses (220 V Model) 5 × 22 mm, Type T, 250 V, 0.315 A
×